![RetainerDesigner](/img/default-banner.jpg)
- Видео 262
- Просмотров 3 888 938
RetainerDesigner
США
Добавлен 13 окт 2007
Training the Next Generation of Orthodontic Technicians.
I help those in the Orthodontic Industry that want to pursue a career to the in the Ortho laboratory Sector go from not having the required education, skills or experience to advance their career at a current ortho lab (or in-house lab) or even open their own orthodontic lab!
I help those in the Orthodontic Industry that want to pursue a career to the in the Ortho laboratory Sector go from not having the required education, skills or experience to advance their career at a current ortho lab (or in-house lab) or even open their own orthodontic lab!
My First Brand New Pressure Pot! Is it better than my old acrylic curing pressure pot?
My first brand new Acrylic Curing Pressure Pot!
www.greatlakesdentaltech.com/great-lakes-6-liter-adjustable-temperature-pressure-pot-225-040.html
Description from product website:
Large volume pressure pot produces a denser, clearer, stronger acrylic by combining moisture, heat, and pressure at a constant rate. Temperature is preset to approximately 120ºF and manually adjusts to a maximum 160ºF. Solid clad bottom provides even heat distribution. Includes an easy-to-read, built-in pressure gauge and quick-release air valve. The pot has a safety device to prevent overheating, and a secure double-locking lid. Comfortably fits full-size articulators, including the SAM® 3 articulator. Easy-to-cle...
www.greatlakesdentaltech.com/great-lakes-6-liter-adjustable-temperature-pressure-pot-225-040.html
Description from product website:
Large volume pressure pot produces a denser, clearer, stronger acrylic by combining moisture, heat, and pressure at a constant rate. Temperature is preset to approximately 120ºF and manually adjusts to a maximum 160ºF. Solid clad bottom provides even heat distribution. Includes an easy-to-read, built-in pressure gauge and quick-release air valve. The pot has a safety device to prevent overheating, and a secure double-locking lid. Comfortably fits full-size articulators, including the SAM® 3 articulator. Easy-to-cle...
Просмотров: 325
Видео
She wanted ALL the Colors: I Made my Daughter's Orthodontic Expanders | Secret Glitter ingredient!
Просмотров 689Год назад
She wanted ALL the Colors: I Made my Daughter's Orthodontic Expanders | Secret Glitter ingredient!
Ultimate Guide: Digital Workflow For A Small Orthodontic Lab! Using Easyrx and Formlab Printers
Просмотров 416Год назад
Ultimate Guide: Digital Workflow For A Small Orthodontic Lab! Using Easyrx and Formlab Printers
Edited Live Stream: My secrets to Constructing Compact (2 Arm) RPE!
Просмотров 375Год назад
Edited Live Stream: My secrets to Constructing Compact (2 Arm) RPE!
Live Stream Edited: "Re-Acrylic-ing" Patient wants to change the color!
Просмотров 300Год назад
Live Stream Edited: "Re-Acrylic-ing" Patient wants to change the color!
Tip #4 For Making Retainers on 3D Printed Models
Просмотров 364Год назад
Tip #4 For Making Retainers on 3D Printed Models
Tip # 3 Making Retainers on 3D Printed Models
Просмотров 206Год назад
Tip # 3 Making Retainers on 3D Printed Models
Tip #2 Making retainers on 3D Printed Models
Просмотров 214Год назад
Tip #2 Making retainers on 3D Printed Models
Tip #1 from my Live Stream: My 5 tips in 2023 for making retainers on 3D Printed Models
Просмотров 182Год назад
Tip #1 from my Live Stream: My 5 tips in 2023 for making retainers on 3D Printed Models
Ortho Lab Digital Workflow - Part 1: Checking in Cases
Просмотров 6934 года назад
Ortho Lab Digital Workflow - Part 1: Checking in Cases
Replacing the IPA in My Form Wash (for the first time!)
Просмотров 9 тыс.5 лет назад
Replacing the IPA in My Form Wash (for the first time!)
Super Spring Retainer w: Helical Loops Short Version
Просмотров 1,2 тыс.5 лет назад
Super Spring Retainer w: Helical Loops Short Version
I need you to do 2 things! #HowItsMadeLab
Просмотров 2575 лет назад
I need you to do 2 things! #HowItsMadeLab
Review: TrioShine Jewlery Steamer for Ortho Lab
Просмотров 7865 лет назад
Review: TrioShine Jewlery Steamer for Ortho Lab
Super Spring Retainer w/ Helical Loops (Long Version)
Просмотров 1,4 тыс.5 лет назад
Super Spring Retainer w/ Helical Loops (Long Version)
Cade Attempts Watermelon Design Retainer as Steve Szara Instructs!
Просмотров 6346 лет назад
Cade Attempts Watermelon Design Retainer as Steve Szara Instructs!
How to make a Baseball Themed Retainer
Просмотров 1,2 тыс.6 лет назад
How to make a Baseball Themed Retainer
Super Spring Retainer with Helix coils (Full video)
Просмотров 3,7 тыс.6 лет назад
Super Spring Retainer with Helix coils (Full video)
Wire Wednesday #19: Acrylic Color Options w/ Josh Dobson Full Video
Просмотров 3056 лет назад
Wire Wednesday #19: Acrylic Color Options w/ Josh Dobson Full Video
Build an Ortho Lab: Part 1 (The Clean-up & Prep)
Просмотров 5266 лет назад
Build an Ortho Lab: Part 1 (The Clean-up & Prep)
Copy of 10 Tips for Faster more productive Wire-bending
Просмотров 4876 лет назад
Copy of 10 Tips for Faster more productive Wire-bending
Copy of Acrylic Application on a Retainer- Salt and Pepper Method
Просмотров 2,6 тыс.6 лет назад
Copy of Acrylic Application on a Retainer- Salt and Pepper Method
Bending labial bow from 4-4 on Mandibular Hawley speed x4
Просмотров 1,3 тыс.6 лет назад
Bending labial bow from 4-4 on Mandibular Hawley speed x4
Review: Dental Lab Steamer - Reliable 5000 Steam Cleaner
Просмотров 5 тыс.7 лет назад
Review: Dental Lab Steamer - Reliable 5000 Steam Cleaner
How To: Make custom band for a large tooth (Short Version)
Просмотров 2,5 тыс.7 лет назад
How To: Make custom band for a large tooth (Short Version)
Product Review: Fire Free Burner: BesQual S600 Instrument Warmer
Просмотров 2,4 тыс.7 лет назад
Product Review: Fire Free Burner: BesQual S600 Instrument Warmer
How To: Safely and quickly remove wires from acrylic
Просмотров 1,7 тыс.7 лет назад
How To: Safely and quickly remove wires from acrylic
That was quite a challenge 😳 😅
So Much SO!!
Ugh. I keep missing your livestream and I love your contents. I currently work in a dental lab as a beginner cad cam tech, and I am really interested in wire bending. Our lab doesn't really have an ortho department so i am learning a lof things from you. Where do you suggest I should start learning when it comes to wire bending ? Simple labial bow? I also feel very overwhemled with the information as there as many types of retainers and bending techniques out there... thanks.....for reading. ❤ i love peter snd lily
Yay! glad you are interested in taking the next step in Ortho wirebending! Not sure if you have checked out my website yet, but I do have some Wirebending 101 exercises, that may help get you started. blog.retainerdesigner.com/?s=101 Another option, probably faster, is taking the Great Lakes Tech hands-on course, It is expensive and you have to travel to be there in person, but I heard it was a great productive course! www.greatlakesdentaltech.com/basic-removable-appliance-fabrication.html
@@RetainerDesigner thank you for your guidance. My current financial situation won't allow me to go to a tech school... I do have a removable manager who knows a thing or two about wire bending and he is letting me to use his tools to mess around with the wires...
Perfect! maybe you can download those practice sheets and Practice, Practice Practice!! :)
nice
Always a good work
Jones Jennifer Wilson Jeffrey Davis Betty
What is the name of the blue liquid?
That is monomer. I call it clear monomer even though it looks blue. It is actually violet tinted to counter cat the natural yellowing of regular clear monomer. Make for a super clear acrylic when finished!
this happens when I am in final exam😅
That would be the worst if this was on an exam!!!
Its always on the last bend! 😆 🤣 😂
Right?!?!
I missed the live today 😢 Hey mister, when we change the pressure pot water we always used a little bit of dishwasher liquid so the wax won’t stick to the pot walls. Easier to clean it.
Great idea! And I bet I smells good too!
You can just put a small amount of wax underneath the plastic it doesn't need to break the model. Once it stood up, just make little adjustments to balance the expansion. It saves time. That's it.
Thank you for this video Cade
where can you buy this
If your talking about the expander screw I order mine from here: www.jbcandcompany.com/shopdisplayproducts.asp?id=372&cat=SKELETAL%2C+SECTIONAL+%26+Micro+Screws
Excellent!!!
Can I take the exam too? 🤔
Absolutely! There are people from all over the world that have gotten thier CDTs. You can get more info here: nbccert.org/certificants/certified-dental-technician/cdt-application.cfm
@@RetainerDesigner nice! Thank you Cade🙏🏼🙏🏼🙏🏼
Hello dear friend I am a big fun of your videos, I have a little question or some tips for this lower Hawley retainer any comments will help thanks in advance.
Sure! I would love to help if I can!
What are those for? Pretty cool
Those are dental models to make ortho appliances on
Hey how are you doing 💝
CDT COSA DE TROLAZOOOO VAMO LOKITAWN
Saaaapeeeeeee
Hi! Very informative. How do you handle the ditching for 6s that are at an angulation such as pointing more lingual? My understanding is that meshmixer will only drop the ditch based on the Y-axis.
That's a good question, might be easier to just 1, Print normal and ditch it by hand using a bur 1. Ditch digitally but using a digital "Carve" tool, or 3. change the y axis using the to match the angle you need using the Edit>Transform tool in mesh mixer then ditch one side, the change the y-axis again and do the other side. Not sure if any of these would be better just thinking off the top of my head :)
Check out PensaLab C64 machine. They're based in Brooklyn, NY. Their WireWare software is super user friendly. I'm talking about designing C clasps in 5-10 seconds...Upper or Lower.
Cade great video as always. I might hit you up on this course.. -I thought I’d share a technique with u take a washcloth cut it in half, fold it and put it over your model holder insert model tighten, thank me later,works great on stone works fantastic on resin models no more model movage/slippage. Stay- Up! Perry
That's a great idea! I going to try that!!! Model slippage with resin models is the worst!!
Hello Cade thanks for another video. I have a question why do Drs ask for C clasp on Hawleys, is it for more stability?
Good question! They usually want them so that there is no occlusal interference, since they are usually go behind the most terminal tooth, they don't have to cross over the occlusion like Adams and ball clasps do, allow the teeth to settle into place.
Did you check out me singing yet?
I did! it was very sweet! I'm sure your sister loved it!
Thank you very much @@RetainerDesigner
@@RetainerDesignerone more assignment please type in " Consider the lilies of the field" by Sandra Schmidt it has a picture of yellow lilies please check out her singing. It's my sister singing that recording was done two months before she passed
Re-watching while bending wire 🤓 Laurie from San Antonio, we met briefly at ORG conference 😎
Not sure what laser welder he’s using if it’s the dice one Great Lakes has a monitor screen hook up that will show the welding a friend of mine up north LA turn me onto it
I believe the laser welder that @szaradentallab is using is an Orion sold by sunstone. I know some of this models have a screen on them but not sure if they come with a video out. But good to know the Dice one from Greatlakes has one!
Too expensive this machine will sink your business. It’s like an albatross you’re trying to work as hard as you can to pay this equipment and you never will because of the software fee. Good luck.
You make a great point! this will be a technology that will have to fit someone's lab and its situation perfectly. Brings me back to when 3D printing started hitting our industry, at that time us small labs sat back and watched the "Whales" in our industry (The larger Ortho Lab) be the first to buy the first 3D printers. Then the 3D printer prices started coming down in price for us smaller labs to dip our toe in. This technology is and echo of that, but i believe more smaller labs will be quicker to embrace and make the investment. But like you said, if you don't do your homework first, it could sink your lab!
@@RetainerDesigner I would be in 100% if it were $10,000 for the machine and 1000 for software a year that’s where it should be just saying - they have no competition that’s the issue -love your videos. Stay up.!
شما وسیله ها و امکانات زیاد و اصلی دارید و کاراتون عالیه آفرین
Hi very good
Thank you
If you ever fix the other heating element, please make a video. I have a brand new one well brand new to me. Looks like it’s never been used in. The heating element is out. Tick-tock tick-tock waiting for that video lol thank you much Perry.😊
I will definitely record it, I been wanting to dig into it, and see what is there!
Auckland New Zealand
I replaced the toggle years ago. I took my pressure pot into Ace Hardware and dude fixed it for me!😮😊
Nice! I hope it is just the toggle! It will be nice to have 2 pressure pots going at once!
Hi how are you 👋
Hello!! Sorry no live stream lately, been sick and/or busy lol!
Hi
I really like your clips, I've recently been working in an orthodontic lab and your clips help me a lot.
So Glad to hear it!!!
I bend it the right way😅
Of Course!!!😁
Both
I need to learn to do both!
Hello! I am k3people. I often watch your live streaming. Thank you. I have a question. If I resin work on a 3d printer model no need for a separator?
yes! absolutely! There are a few 3D printers (Stratasys and Envisiontec they have resin you do not need separator) but a majority of 3D printer resins you will need a good separator (Basically and acrylic to acrylic separator.)
OMG THE SONG
I couldn't help but use it when I heard it!
Great work, lots of work too. Thank you for the video. Very helpful. 😊
Is there an extra fee for auto base?
Good question. The EasyRx 3D Automated Services($125/mo) - you get 50 Scans Per Month , anything over 50 is $1.36/ scan
I tried printing keysplint soft for splints. Not good reviews from dentists. Went back to clearsplint. Love to see how you do with splints.
Thank you for the heads up! Yall.will for sure be with me during my journey with 3D printing splints!
Straightening the 8 inch 20 or 21 gauze wire
You want me to show how I straighten those size wires?
Can you upload quad helix in making video
Yes would love to see it, the question is - can he do it?
ruclips.net/user/livefzeH6siNa2M
:)
Happy birthday 🎉🎁🎊🎂
Happy Belated Birthday, Cade!!! Hope it's a birthday weekend and you get lots of time to celebrate 🎉 🎉🎉
What is the cost of the AOS machine?
I believe it is just under $100K
Team Cade 🔥
Watching from Kenya 🇰🇪 very interesting...
Hello, what is the yellow material used to fix the steel wire?
That is called "Sticky Wax" I get it from here: www.jbcandcompany.com/shopexd.asp?id=718&bc=no